What is the difference between Fiberglass Wool & Rockwool Insulation?

Fiberglass insulation has been the most popular type of home insulation, and it’s easy to see why: Fiberglass is affordable, easy to install, readily available in a wide variety of sizes and, most importantly, an excellent insulator.

Fiberglass insulation is composed of fine glass fibers that are woven, lightly compressed and then cut into long rolls or batts (slabs/rectangular blocks). It is available faced with kraft paper or aluminum foil as well as unfaced. Fiberglass also comes as loose-fill insulation, which can be spread by hand or blown into place by a mechanical blower.

Today, fiberglass remains the undisputed king of insulation, but its crown is being threatened by a relatively new insulating material: Rockwool also known as mineral wool.

Mineral wool, which is also commonly called rock wool, comes in easy-to-install batts, similar to fiberglass. But instead of being composed of fluffy glass fibers, rock wool is made from volcanic rock, primarily basalt.

What’s the differences between these two popular types of insulation?.

R-Value: The thermal resistance of insulation is measured by what’s commonly known as the R-value, and the higher the R-value, the better. Rockwool has an R-value of 3-4 per inch, one of the highest for insulation materials on the market. But what does this mean? The R-value of insulation represents its heat resistance. The lower the R-value, the less it blocks heat. In other words, materials with higher R-values have higher insulating qualities. Don’t feel confused if you see an R-value on the label that is much higher; if you buy 3-inch thick Rockwool batts, the R-value may be approximately 9-12. This is 3 inches times the R-value. Fiberglass has an R-value of approximately 2.2 to 2.7 per inch of thickness.

Size: Fiberglass insulation is available in a wider range of sizes and types than mineral wool. Mineral wool insulation is typically only available in unfaced batts.

Sustainability: Mineral wool is composed of 70 percent or more recycled content. Fiberglass insulation typically contains 20 to 30 percent recycled content.

Cost: Fiberglass insulation costs 25 to 50 percent less than mineral wool. Fiberglass insulation for a 2×6 wall costs between 57 cents and 72 cents per square foot. Mineral wool insulation for the same wall runs about $1 to $1.10 per square foot.

Density: Mineral wool insulation has superior sound-deadening properties. It has a density of 1.7 pounds per cubic foot, as compared to 0.5 to 1.0 for fiberglass. Because of its density, mineral wool is hard to compress. Fiberglass, on the other hand, will lose some of its insulating value if it’s compressed too tightly.

Weight: Fiberglass is lightweight and easy to carry, but the batts are rather limp and can be challenging to set into place. Mineral wool is heavier than fiberglass, but the batts are also stiffer, so they don’t bend or flop over as easily.

Water Resistance: Mineral wool insulation is hydrophobic, meaning it’s highly resistant to moisture and water. Since it doesn’t absorb moisture, mineral wool doesn’t promote rot, corrosion, fungi, mold, mildew or bacterial growth. If fiberglass insulation gets wet, it becomes soggy, and its insulating value drops significantly.

Loose-Fill: Loose-fill fiberglass insulation provides a quick, easy and economical way to insulate attic floors and wall cavities. Loose-fill mineral wool does exist, but it’s difficult to find.

Installation: Mineral wool comes in dense, firm batts that are friction-fit into place; no stapling required. Fiberglass batts must be secured with staples or wire. To cut fiberglass insulation, compress it flat with a board or metal straightedge, then slice it with a utility knife. Use a serrated bread knife or woodcutting handsaw to cut mineral wool insulation. It’s recommended that you wear a dust mask when cutting and handling any type of insulation, including fiberglass and mineral wool.

Fire Resistance: Mineral wool is extremely fire resistant and can be used as a firestop. Fiberglass insulation is noncombustible, but not nearly as fire resistant as mineral wool.

CONTACT US
Rockwool Insulation Slabs / Batts – High Density Fireproof Thermal Panels 1200mm x 600mm x 100mm | Nairobi, Kenya

Rockwool Insulation Slabs / Batts – High Density Fireproof Thermal Panels 1200mm x 600mm x 100mm | Nairobi, Kenya

Product Overview

The Rockwool Insulation Slab / Batt (1200mm x 600mm x 100mm) is a heavy-duty mineral wool insulation solution designed for extreme heat, fire protection, and acoustic control. With increased thickness and a density of 50kg/m³, this product provides superior thermal insulation and enhanced sound absorption while withstanding temperatures of up to 1000°C.

Made from molten basalt rock fibers, these slabs deliver excellent dimensional stability, low heat transfer, and long service life even in harsh industrial environments. The 100mm thickness is ideal for applications requiring higher insulation performance and fire resistance.


Specifications

  • Type: Rockwool Insulation Slab / Batt

  • Dimensions: 1200mm x 600mm x 100mm

  • Density: 50kg/m³

  • Maximum Temperature: Up to 1000°C

  • Material: Mineral wool (basalt rock fibers)

  • Fire Rating: Non-combustible

Why Choose Kenworks Ventures Company Limited?

Reliable supplier of premium rockwool insulation materials
Products tested for fire resistance and high-temperature performance
Expert technical support for insulation design and application
Comprehensive range of rockwool slabs, rolls, pipe sections, and batts


Contact Us

📞 0722 706 416 / 0720 119 668
📧 info@kenworksventures.co.ke / kenworksventures@gmail.com

Rockwool Insulation Slabs / Batts – High Temperature Thermal & Acoustic Panels 1200mm x 600mm x 50mm | Nairobi, Kenya

Rockwool Insulation Slabs / Batts – High Temperature Thermal & Acoustic Panels 1200mm x 600mm x 50mm | Nairobi, Kenya

Product Overview

The Rockwool Insulation Slab / Batt (1200mm x 600mm x 50mm) is a high-performance mineral wool insulation material designed for applications requiring excellent heat resistance, fire safety, and sound absorption. With a density of 50kg/m³ and temperature resistance of up to 1000°C, this product is ideal for demanding industrial, commercial, and building insulation environments.

Manufactured from natural basalt rock fibers, these slabs provide outstanding thermal stability, low thermal conductivity, and superior acoustic performance. The rigid yet workable structure allows easy installation in walls, ceilings, partitions, machinery enclosures, and industrial equipment.


Specifications

  • Type: Rockwool Insulation Slab / Batt

  • Dimensions: 1200mm x 600mm x 50mm

  • Density: 50kg/m³

  • Maximum Temperature: Up to 1000°C

  • Material: Mineral wool (basalt rock fibers)

  • Fire Rating: Non-combustible

Why Choose Kenworks Ventures Company Limited?

Trusted supplier of high-quality refractory and insulation materials
Products tested for thermal performance, fire safety, and durability
Technical support for product selection and correct application
Wide range of rockwool slabs, rolls, pipe sections, and specialty insulation


Contact Us

📞 0722 706 416 / 0720 119 668
📧 info@kenworksventures.co.ke / kenworksventures@gmail.com

Fiberglass/Glasswool Insulation Slabs – Thermal & Acoustic Batt 1200mm x 600mm x 100mm | Nairobi, Kenya

Fiberglass/Glasswool Insulation Slabs – Thermal & Acoustic Batt 1200mm x 600mm x 100mm | Nairobi, Kenya

Product Overview

The Fiberglass/Glasswool Insulation Slab 1200mm x 600mm x 100mm is a premium thermal and acoustic insulation solution for residential, commercial, and industrial applications. With a density of 32kg/m³ and temperature tolerance of 350°C to 450°C, these 100mm slabs provide enhanced heat retention, superior soundproofing, and excellent fire resistance.

Manufactured from high-quality glass fibers, the slabs are lightweight, easy to handle, and durable. They are ideal for insulating walls, ceilings, floors, HVAC ducts, and industrial equipment while improving energy efficiency and indoor comfort.


Specifications

  • Type: Fiberglass/Glasswool Insulation Slab/Batt

  • Dimensions: 1200mm x 600mm x 100mm

  • Density: 32kg/m³

  • Temperature Range: 350°C – 450°C

  • Material: High-quality glass fibers

  • Color: Typically yellow

Why Choose Kenworks Ventures Company Limited?

✅ Leading supplier of high-quality fiberglass and insulation materials in Kenya
✅ Products tested for thermal, acoustic, and fire performance
✅ Expert guidance for selection and installation
✅ Comprehensive range of insulation solutions: slabs, rolls, batts, and specialty materials


Contact Us

📞 0722 706 416 / 0720 119 668
📧 info@kenworksventures.co.ke / kenworksventures@gmail.com

Fiberglass/Glasswool Insulation Slabs – Thermal & Acoustic Batt 1200mm x 600mm x 50mm | Nairobi, Kenya

Fiberglass/Glasswool Insulation Slabs – Thermal & Acoustic Batt 1200mm x 600mm x 50mm | Nairobi, Kenya

Product Overview

The Fiberglass/Glasswool Insulation Slab 1200mm x 600mm x 50mm is a high-performance thermal and acoustic insulation material engineered for residential, commercial, and industrial applications. With a density of 32kg/m³ and operating temperature range of 350°C to 450°C, these slabs provide excellent heat resistance, sound absorption, and fire-retardant properties.

Made from high-quality glass fibers, these slabs are lightweight, flexible, and easy to handle while maintaining superior durability. They are ideal for insulation of walls, ceilings, floors, ducts, and HVAC systems, helping to reduce energy costs and improve indoor comfort.


Specifications

  • Type: Fiberglass/Glasswool Insulation Slab/Batt

  • Dimensions: 1200mm x 600mm x 50mm

  • Density: 32kg/m³

  • Temperature Range: 350°C – 450°C

  • Material: High-quality glass fibers

  • Color: Typically yellow

Why Choose Kenworks Ventures Company Limited?

✅ Trusted supplier of thermal and acoustic insulation solutions in Kenya
✅ Products tested for high-temperature resistance and durability
✅ Technical support for insulation selection and application
✅ Wide range of fiberglass/glasswool options for slabs, rolls, and batts


Contact Us

📞 0722 706 416 / 0720 119 668
📧 info@kenworksventures.co.ke / kenworksventures@gmail.com

Armaflex Foil-Faced Self-Adhesive Insulation Sheet/Roll (10m x 1m x 19mm / 3/4") | Pipe & HVAC Thermal Insulation – Nairobi, Kenya

Armaflex Foil-Faced Self-Adhesive Insulation Sheet/Roll (10m x 1m x 19mm / 3/4″) | Pipe & HVAC Thermal Insulation – Nairobi, Kenya

Product Overview

The Armaflex Foil-Faced Self-Adhesive Insulation Sheet/Roll (10m x 1m x 19mm / 3/4″) is designed for demanding insulation applications on HVAC, refrigeration, and hot water systems. Its 19mm (3/4 inch) thickness ensures superior heat retention, enhanced condensation control, and long-lasting durability in systems operating at -40°C to 120°C.

The foil-facing enhances thermal efficiency and acts as a moisture barrier, while the self-adhesive backing provides fast and reliable installation on pipes, ducting, bends, tanks, and irregular shapes. With a density of 80kg/m³, it offers resistance to wear, compression, and microbial growth.


Specifications

  • Type: Armaflex Nitrile Rubber Insulation Sheet/Roll (Foil-Faced + Adhesive)

  • Thickness: 19mm (3/4 inch)

  • Dimensions: 10m (Length) x 1m (Width)

  • Material: Closed-cell NBR elastomeric foam

  • Density: 80kg/m³

  • Temperature Range: -40°C to +120°C

  • Finish: Foil-faced with self-adhesive backing

Why Choose Kenworks Ventures Company Limited?

✅ Trusted supplier of premium insulation products in Kenya
✅ Products tested for durability, thermal performance, and condensation control
✅ Technical support for product selection and application
✅ Wide variety of Armaflex: plain, foil-faced, adhesive-backed, and preformed pipe solutions


Contact Us

📞 0722 706 416 / 0720 119 668
📧 info@kenworksventures.co.ke / kenworksventures@gmail.com

Armaflex Foil-Faced Self-Adhesive Insulation Sheet/Roll (14m x 1m x 12.5mm / 1/2") | Pipe & HVAC Thermal Insulation – Nairobi, Kenya

Armaflex Foil-Faced Self-Adhesive Insulation Sheet/Roll (14m x 1m x 12.5mm / 1/2″) | Pipe & HVAC Thermal Insulation – Nairobi, Kenya

Product Overview

The Armaflex Foil-Faced Self-Adhesive Insulation Sheet/Roll (14m x 1m x 12.5mm / 1/2″) is engineered for high-performance thermal insulation on HVAC, refrigeration, and hot water systems. Its 12.5mm (1/2 inch) thickness provides efficient heat retention and condensation prevention for moderate insulation needs.

Featuring a foil-facing barrier and self-adhesive backing, this roll ensures quick, clean, and secure installation while enhancing thermal efficiency. With a density of 80kg/m³, it resists compression, moisture, and microbial growth, delivering long-lasting protection.


Specifications

  • Type: Armaflex Nitrile Rubber Insulation Sheet/Roll (Foil-Faced + Adhesive)

  • Thickness: 12.5mm (1/2 inch)

  • Dimensions: 14m (Length) x 1m (Width)

  • Material: Closed-cell NBR elastomeric foam

  • Density: 80kg/m³

  • Temperature Range: -40°C to +120°C

  • Finish: Foil-faced with self-adhesive backing

Why Choose Kenworks Ventures Company Limited?

✅ Reliable supplier of high-quality insulation materials in Kenya
✅ Products tested for thermal performance and condensation resistance
✅ Technical guidance for installation and insulation selection
✅ Extensive Armaflex range: plain, foil-faced, adhesive-backed, and preformed pipe sections


Contact Us

📞 0722 706 416 / 0720 119 668
📧 info@kenworksventures.co.ke / kenworksventures@gmail.com